Tender announcement for sporadic engineering construction projects such as plant gas building renovation

YANGZI

Release Time:

2020-05-08

Bidding and bidding for sporadic engineering construction projects such as graphitization and fitter shift workshop gas building renovation

I. Name of the bidding project:

Bidding and bidding for sporadic engineering construction projects such as graphitization and fitter shift plant gas building renovation

II. Bidding Instructions:

Project name and bidding content: Nantong Yangzi Carbon Co., Ltd. part of the plant gas building renovation project construction bidding project

According to the company's arrangement, it is planned to carry out rectification and reconstruction of some damaged gas buildings of the plant.

(11) At present, the serious damage is a set of graphitized color steel tiles on the roof, a total of 7, each with an area of 11*77=2 square meters, of which the serious damage is 77 in the north, which needs to be replaced. Material: color steel plate 160 square meters, C65*25*2*5.112 C-beam steel total 9 meters, the remaining <> need to be nailed and supplemented with color steel plate (on-site observation).

(2) Mobile workshop gas building

1. Remove the original gas building asbestos tile poncho (including tripods and trusses), re-make and install the tripod according to the original size (angle iron size is not less than 50*50), install two C-shaped steel (specification is 160*60*25*2.5), and install 0.5 thick color steel plate poncho

2. Clean up the original window hygiene, paint the steel window, install the sun panel (the specification thickness is not less than 2.5mm) on the outside of the original gas building window, and measure the specific size of the specific size of about 40 square meters (including the skeleton and the outer frame pressing strip).

(3) The damaged 2 lattice windows on the west gable and south wall of the original roasting workshop are closed with solar panels (the specification thickness is not less than 5.30mm), and the specific dimensions of the area of about <> square meters (including the skeleton) are measured on site.

(4) Finished joint library:

1. Demolition of the original west gable FRP tile wall (area of about 40 square meters).

2. Install new sun panel walls. (The thickness of the sun panel is not less than 2.5mm, using the original skeleton, not enough to add by itself)

(5) Machined aisle gutter

1. Demolition of the original iron eaves ditch, about 12 meters long

2. Production and installation of 3mm thick galvanized iron plate eaves gutter and supporting downspouts (PVCφ110)

(6) In addition to the construction waste under demolition, the scrap steel is transported to the waste yard.

III. Bidding Eligibility Requirements:

1. Qualified suppliers who have been registered and approved by our company's online bidding platform.

2. The bidder must be an independent legal person registered in China in accordance with the Company Law and other organizations registered according to law, with a registered capital of more than RMB 50,<>;

3. The construction unit participating in the bidding must have independent legal personality and civil engineering level <> and above construction qualification;

4. Financial status: have good bank credit, business reputation and comprehensive strength, can meet the requirements of the tenderer, are not in the state of being ordered to suspend business, property is taken over, frozen, bankruptcy, and have no bad bidding record (provide a letter of commitment).

5. The bidder should be qualified as a general VAT taxpayer and be able to issue special VAT invoices; (Proof required)

4. Bid Bond

1. Bid deposit: 5000,<> RMB, paid in cash or bank wire transfer. The remittance information is as follows:

Remittance unit: Nantong Yangzi Carbon Co., Ltd

Bank: ICBC Nantong Tangzha Sub-branch

Account number: 1111823109000008990

2. Suppliers who have financial dealings with the company may issue a "Confirmation Letter of Transfer of Bid Deposit" and agree to transfer from the supplier's accounts receivable. After the Finance Department confirms the amount of arrears and goes through the procedures for locking up the arrears, it will be deemed to pay the bid deposit.

3. The bidding unit uploads the screenshot of the deposit payment voucher to the electronic bidding platform, and bids after being reviewed and approved by the company's finance department.

4. The bidding price is the construction unit price excluding tax (including materials, transportation, labor, scaffolding, safety and other related costs).

5. The bid deposit of the unsuccessful unit will be returned according to the original path within 15 days after the end of the bidding.

5. Bidding method: within the specified time, bid through our company's online bidding platform.

VI. Bidding Documents and Bidding Time:

After paying the bidding deposit, upload the relevant vouchers to the company's online bidding platform, download the "Bidding Documents", and participate in the bidding in time according to the bidding time announced on the company's bidding platform.

7. Name, address and contact information of the bidding unit:

1. Unit name: Nantong Yangzi Carbon Co., Ltd

2. Address: No. 208, Tangzha West Street, Nantong City, Jiangsu Province

3. Zip Code: 226002

4. Contact: Wang Xingshan

5. Contact number: 0513-85559291, 13921615786

6、E-mail： wxsabcd@sina.com

8. Company website: http://www.ntcarbon.com

Bidding platform: http://58.221.87.78:6066

Nantong Yangtze Carbon Co., Ltd

2020-05-06

Related Downloads