Basic engineering of graphite electrode joint screwing device


Release Time:


Basic engineering of machining E-line graphite electrode joint screwing device

Nantong Yangtze Carbon Co., Ltd
Bidding announcement for the basic engineering of the machined E-line graphite electrode joint spinning device
I. Name of the bidding project:
Basic engineering of machining E-line graphite electrode joint spinning device
II. Bidding Instructions:
Project name and bidding content: Nantong Yangtze Carbon Co., Ltd. machined E-line graphite electrode joint spinning device basic engineering bidding project
1. Demolition of the track flute in the construction area (keep it intact as much as possible and be recycled by the bidding party)
2. Chisel the concrete floor in the original workshop construction area
3. Excavation
4. Complete the basic construction of the graphite electrode joint spinning device according to the drawing requirements provided by the owner
5. Cooperate with the owner to complete the installation of electrical wiring and air ducts (gouge the concrete trench for about 30m, and pour the concrete floor)
6. After the equipment is installed, the reserved hole shall be grouted according to the owner's requirements, and the strength shall not be lower than the original concrete strength grade
7. After the construction is completed, the site is cleaned up, and the muck is transported out of the factory
III. Bidding Eligibility Requirements:
1. Qualified suppliers who have been registered and approved by our company's online bidding platform.
2. The bidder must be an independent legal person registered in accordance with the Company Law and other organizations registered according to law in China, with a registered capital of more than RMB 10,<>;
3. Qualification for production and installation of mechanical equipment.
4. Financial status: have good bank credit, business reputation and comprehensive strength, can meet the requirements of the tenderer, are not in the state of being ordered to suspend business, property is taken over, frozen, bankruptcy, and have no bad bidding record (provide a letter of commitment).
5. The bidder should be qualified as a general VAT taxpayer and be able to issue special VAT invoices; (Proof required)
4. Bid Bond
1. Bid deposit: 10000,<> RMB, paid by cash or bank wire transfer, the remittance information is as follows:
Remittance unit: Nantong Yangzi Carbon Co., Ltd
Bank: ICBC Nantong Tangzha Sub-branch
Account number: 1111823109000008990
2. Suppliers who have financial dealings with the company may issue a "Confirmation Letter of Transfer of Bid Deposit" to agree to transfer from the supplier's accounts receivable, and after the Finance Department confirms the amount of arrears and goes through the procedures for locking the arrears, it is deemed to pay the bid deposit.
3. The bidding unit uploads the screenshot of the deposit payment voucher to the electronic bidding platform, and bids after being reviewed and approved by the company's finance department.
4. The bidding price is the total price of the transformation excluding tax.
5. The unsuccessful unit payment will be refunded according to the original route within 15 days after the end of the auction.
5. Bidding method: within the specified time, bid through our company's online bidding platform.
VI. Bidding Documents and Bidding Time:
After paying the bidding deposit, upload the relevant vouchers to the company's online bidding platform, download the "Bidding Documents", and participate in the bidding in time according to the bidding time announced on the company's bidding platform.
7. Name, address and contact information of the bidding unit:
1. Unit name: Nantong Yangzi Carbon Co., Ltd
2. Address: No. 208, Tangzha West Street, Nantong City, Jiangsu Province
3. Zip Code: 226002
4. Contact: Wang Xingshan
5. Contact number: 0513-85559291, 13921615786
8. Company website:
Bidding platform:
Nantong Yangtze Carbon Co., Ltd
November 2020, 11

Related Downloads

  • File size: 59.7KB